VideoMicro
Microphone compact pour caméra
Le VideoMicro est un microphone de haute qualité pour caméra, idéal pour le vlogging et la réalisation de films. Ultra-compact et léger, c'est le microphone parfait pour capturer un son incroyable qui accompagne une vision inspirante.
Caractéristiques principales :
- Microphone à condensateur de haute qualité pour caméra
- Compact et léger (seulement 42g)
- Idéal pour une utilisation avec des appareils photo compacts, des caméras d'action et des reflex numériques
- Montage antichoc intégré Rycote® Lyre® pour une isolation supérieure contre le bruit de manipulation
- Pare-brise en fourrure de luxe pour l'enregistrement en extérieur
- Super facile à utiliser, aucune pile requise
- Microphone à condensateur de haute qualité pour caméra
- Compact et léger (seulement 42g)
- Idéal pour une utilisation avec des appareils photo compacts, des caméras d'action et des reflex numériques
- Montage anti-choc intégré Rycote® Lyre® pour une isolation supérieure contre le bruit de manipulation
- Pare-brise en fourrure de luxe pour l'enregistrement en extérieur
- Super facile à utiliser, aucune pile requise
Améliorez Votre Audio
Utiliser un microphone externe de haute qualité est le moyen le plus simple d'améliorer significativement l'audio de votre caméra. Avec sa capsule à condensateur de haute qualité et son diagramme polaire cardioïde, le VideoMicro offre un son net, clair et naturel, idéal pour le vlogging et le tournage en mode run-and-gun.

Polyvalence Compacte
Le VideoMicro est ultra compact et ne pèse que 42g, ce qui le rend parfait pour une utilisation avec des appareils photo plus petits ainsi que des smartphones et autres appareils mobiles (câble SC7 supplémentaire requis). Il excelle également lorsqu'il est utilisé sur une perche et, grâce à son revêtement céramique de haute qualité et sa bonnette anti-vent en fourrure de luxe, il est idéal pour une utilisation en extérieur dans divers scénarios de tournage, faisant du VideoMicro un microphone compact extrêmement polyvalent.

Spécifications
Foire aux questions
The VideoMicro is extremely user-friendly as there's no switches or battery to worry about - just plug in and go. All microphones need power however, and in the case of the VideoMicro it is drawing a very small voltage commonly referred to as "plug-in power" from your camera (or recording device) via the audio cable.
Plug-in power has long been a standard for camera manufacturers, and so the VideoMicro is compatible with the vast majority of cameras in the market.
The following cameras unfortunately do not support the VideoMicro:
- Nikon D7000
- Canon T3/1100D
- Canon C100, C300, C500
- Canon VIXIA HFR500
- Canon VIXIA HFG20, HFG30
- Canon XA-10
- Canon Vixia G10
- Canon Legria HF G25
If you are experiencing issues getting your VideoMicro to operate with a camera not listed above, firstly be sure to update your camera's firmware to the latest version (available from your camera manufacturer's website). If you are still experiencing issues please get in touch with us via our support page.
The RØDE cold shoe adaptor is a standard size adaptor, also known as a universal shoe mount. This standard shoe is suitable for the majority of camera attachments.
If your camera has a different, or custom adaptor, please contact your camera manufacturer for information on converters to fit the universal shoe connection.
Yes, all of our microphones in the VideoMic range have a standard 3/8 thread built into the bottom of the cold shoe mount for connection to a boompole, mic stand or tripod.
This is usually caused by the function of "Automatic Gain Control" or "AGC" on the camera.
Basically, when the camera cannot sense an audio input signal, it automatically increases the gain of the input. It is increased so much that the noise floor in the camera microphone amplifier becomes audible.
The AGC can be disabled on some cameras and it is worth checking with you camera manufacturer for information on this, which can sometimes require a firmware update to the camera.
RØDE have created the VideoMic Pro to help combat this issue, the VideoMic Pro contains a 20dB pre amplifier, boosting the mic signal so that the camera will see a good signal level and not engage its AGC.
We recommend setting your audio levels manually to achieve an optimum signal to noise ratio and disabling the AGC of the camera.